In the case of this Sony sound bar, seen below, the ARC port is labeled "TV (ARC)" and "HDMI Out". This labeling reflects that the soundbar is also an HDMI switcher, so you're supposed to plug your HDMI-based gear into the bar and then the bar into the TV (so the ARC port is actually functioning both as an HDMI out from the bar as well as TV in

Unplug the HDMI cables and plug them back in. Power cycle all devices - turn them off, unplug from the wall, plug back in, and turn back on. Turn HDMI-CEC on. Change the sound settings on your TV. Change ARC/eARC setting or TV audio input mode to "Auto" or "On.". By Jonah Matthes.
Press Home on your Roku remote. Select Live TV. Follow the instructions on the TV screen to complete setup. If Live TV is missing, you can add it by going to Settings > TV inputs > Live TV > Set up input. Note: The placement of the HDTV antenna can affect which TV stations you may be able to receive and the quality of the TV signal.
Select Setup. Select Input Skip. Choose "No" next to the source you want to use. Now, you can change the input: Our Recommendation. The Best Gaming TV. Read More. Press the Input button on your remote control. You'll see a list of inputs. Use arrows on your remote control to scroll up and down. Select the input you want to use. There you have it! The simplest way to change a TV's input mode is to use the buttons located on the front, side, or bottom of the television itself. While this may not work well on older television models - and may or may not work on present models, depending on the design - it is generally possible to change the TV's input mode by pressing a button labeled "Input," then using either the channel or volume If it cycles through the inputs - wait 10 seconds between button presses to allow the TV to detect the video. If a menu is displayed - use the arrow buttons on the TV remote to choose the right input and then press the Enter or Select Alternatively, select each input one at a time. Wait 10 seconds between each to allow the TV to detect the video. unit or on the TV. Example 1 Press INPUT. The INPUT list screen displays. 2 Press / to select the input source. An image from the selected source automatically displays. You can also select the input source by pressing INPUT. Each time INPUT is pressed, the input source toggles.

On my TCL Roku TV, if I briefly press the power button it displays a little menu with the inputs. I can then press it again to move to a different input. I don't know if the Sharp is the same, so hopefully someone else knows more about that brand if it doesn't work the same way. Help others find this answer and click "Accept as Solution."

Hit the HOME button & then look for the SETTINGS (gear icon all the way on the right) & select the following: > Display & Sounds (top right) > Power Controls > Power On menu (4th from the top). From there, change the option to "Last Input" and the TV will always go to the last input that was used when it is turned on. Had to do it twice on yzRNYS.
  • ugb4g0f7yd.pages.dev/820
  • ugb4g0f7yd.pages.dev/158
  • ugb4g0f7yd.pages.dev/783
  • ugb4g0f7yd.pages.dev/127
  • ugb4g0f7yd.pages.dev/952
  • ugb4g0f7yd.pages.dev/272
  • ugb4g0f7yd.pages.dev/278
  • ugb4g0f7yd.pages.dev/574
  • ugb4g0f7yd.pages.dev/324
  • ugb4g0f7yd.pages.dev/707
  • ugb4g0f7yd.pages.dev/783
  • ugb4g0f7yd.pages.dev/629
  • ugb4g0f7yd.pages.dev/314
  • ugb4g0f7yd.pages.dev/592
  • ugb4g0f7yd.pages.dev/713

    • sharp tv input settings